Version 2.0 compared with Version 1.2.a
The new version 2.0 , based on version 1.2.a, is necessary to run the new Baan IV Automotive Global Solution (AGS0).
Changes SA2 – Schedule Header Data
| Field number | Outgoing | Incoming |
| 4 – change | The combination of tdpsc001.plnt and tdpsc001.delp will be mapped to tdpsc004.plnt | No change |
| 37 – change | No change | Mapping to tdssc102.iccd instead of tdssc102.txta |
| 47 – change | No change | Mapping to tdssc102.creq instead of tdssc102.txta |
| 48 – change | No change | Mapping to tdssc102.dtbk instead of tdssc102.txta |
| 49 – new | NA | Mapping to tdssc102.pups |
| 50 – new | NA | Mapping to tdssc102.hdtf |
| 51 – new | NA | Mapping to tdssc102.hdtt |
| 52 – new | NA | Mapping to tdssc102.modl |
| 53 – new | NA | Mapping to tdssc102.relt |
| 54 – new | Data record end sign (old position was 49) |
NA |
Changes SA4 – Schedule Line Data
| Field number | Outgoing | Incoming |
| 10 – change | no change | Enhanced by new frequency ‘Range of Weeks’ |
| 17 – new | 4 in case of monthly requirement | tdssc102.nowk Number of weeks if frequncy type ‘Range of Weeks’ |
| 18 – new | Data record end sign (old position was 17) |
NA |
Changes SA6 – Packaging Data
Packaging information is not written to text anymore but into table tdssc231
| Field number | Outgoing | Incoming |
| 6 – change | no change | Mapping to tdssc231.cpak instead of tdssc102.txta |
| 7 – change | no change | Mapping to tdssc231.pack instead of tdssc102.txta |
| 8 – change | no change | Mapping to tdssc231.cqty instead of tdssc102.txta |
| 10 – new | SA | used as qualifier |
| 11 - new | 3 or 1 | tdssc231.plvl |
| 12 – new | M | tdssc231.ptyp |
| 13 – new | NA | tdssc231.puqt |
| 14 – new | tdpsc001.cuqp | tdssc231.cuqs |
| 15 - new | NA | tdssc231.dsca |
| 16 – new | NA | tdssc231.clra |
| 17 – new | Data record end sign (old position was 10) |
NA |