Version 2.0 compared with Version 1.2.a
The new version 2.0 , based on version 1.2.a, is necessary to run the new Baan IV Automotive Global Solution (AGS0).
Changes SA2 – Shipping Schedule Header Data
| Field number | Outgoing | Incoming |
| 4 – change | The combination of tdpsc001.plnt and
tdpsc001.delp will be mapped to tdpsc004.plnt instead of tdpsc229.iedi(5) |
No change |
| 44 – change | No change | Mapping to tdssc229.creq instead of tdssc229.iedi(4) |
| 45 – change | No change | Mapping to tdssc229.dtbk instead of tdssc229.iedi(5) |
| 46 – new | NA | Mapping to tdssc229.pups |
| 47 – new | NA | Mapping to tdssc229.hdtf |
| 48 – new | NA | Mapping to tdssc229.hdtt |
| 49 – new | Data record end sign (old position was 46) |
NA |
Changes SA4 – Shipping Schedule Lines
| Field number | Outgoing | Incoming |
| 11 – new | NA | Mapping to tdssc230.fsdt |
| 12 – new | NA | Mapping to tdssc230.fsti |
| 13 – new | NA | Mapping to tdssc230.lsdt |
| 14 – new | NA | Mapping to tdssc230.lsti |
| 15 – new | Data record end sign (old position was 11) |
NA |
Changes SA5 – Shipping Schedule Packaging Data
| Field number | Outgoing | Incoming |
| 6 – change | NA | Mapping to tdssc231.cpak instead of tdssc229.txta |
| 7 – change | NA | Mapping to tdssc231.pack instead of tdssc229.txta |
| 8 – change | NA | Mapping to tdssc231.cqty instead of tdssc229.txta |
| 10– new | SA | Used as qualifier for item conversion |
| 11 – new | 1, 2 or 3 | Mapping to tdssc231.plvl |
| 12 – new | M or A | Mapping to tdssc231.ptyp |
| 13 – new | NA | Mapping to tdssc231.puqt |
| 14 – new | tdpsc001.cuqp | Mapping to tdssc231.cuqs |
| 15 – new | NA | Mapping to tdssc231.dsca |
| 16 – new | NA | Mapping to tdssc231.clra |
| 17 – new | Data record end sign (old position was 10) |
NA |